Elektron Monomachine Manuel d'utilisateur télécharger pdf

QUICKSTART GUIDE: MONOMACHINE

PROGRAMMING A PATTERN

The Monomachine sequencer is very quick to operate. Is is possible to input

notes both on a 64-step grid and in real time. Here the GRID RECORDING

mode will be explained.

1. The RECORD LED (e) indicates whether GRID RECORDING mode is active

or not. A lit RECORD LED means the mode is active. If the mode is not active,

activate it by pressing the [RECORD] key(d) .

2. Select the ﬁrst track by pressing the [TRACK 1] key(g) .

3. Lit TRIG LED's (i) indicate note trigs. Enter note trigs by pressing the

[TRIG] keys. If the track is longer than 64 steps of length, select the step range

that should be edited by pressing the [SCALE SETUP] key (h) . If a note trig is

pressed and held, a little mini-keyboard will pop up in the lower left side of the

 screen. Here the pitch of the note trig is seen. While the [TRIG] key of the

note trig is pressed and held the [LEFT] and [RIGHT ARROW] keys (k ) can

be used to assign a new pitch value to the note trig.

4. Press [PLAY]. When the running sequencer  hits the note trigs, the

machine assigned to track 1 will be trigged and therefore generate sound.

 Notes can be entered and removed while the sequencer is playing.

PLAYING A PATTERN

The Monomachine can contain up to 128 patterns. Each pattern consists of six

internal tracks and six  tracks. Each internal track contains a machine.

Machines either generate sounds or function as an eect.

1. Make sure the MASTER VOLUME KNOB (a) is turned up.

2. Check so BANK GROUP A-D (c) is selected. The BANK GROUP currently

selected is indicated by the two 's above the [SLIDE] key. If BANK GROUP

A-D is not selected, press the [BANK] key (b) .

3. Choose pattern 01 by holding the [PATTERN SELECTION] key (j) marked

A and pressing the ﬁrst [TRIG] key (m) . Pattern 02 is selected by pressing

the [PATTERN SELECTION] key and [TRIG] key 2.

4. Press [PLAY] (f) to listen to the pattern.

 Patterns can be changed without having to stop the sequencer.

 Open the MUTE MENU by pressing and holding the [FUNCTION]

key and pressing the [BANK] key. Mute individual tracks by pressing

the six leftmost [TRIG] keys. Press the [TRIG] keys again to make the

tracks audible. Exit the MUTE MENU by pressing [EXIT/NO] (l).

This quick start will guide you through some of the basic operations to allow you to start

using the Monomachine right away. Please visit www.elektron.se for Monomachine tutorial videos.

jl k

Please visit www.elektron.se for tutorial videos.

1 2

Résumé du contenu

Page 1 - QUICKSTART GUIDE: MONOMACHINE

QUICKSTART GUIDE: MONOMACHINEPROGRAMMING A PATTERNThe Monomachine sequencer is very quick to operate. Is is possible to input notes both on a 64-step

Page 2 - PARAMETERS

PARAMETER LOCKSParameter locks are the secret weapon of the Monomachine. They allow parameter changes per note trig.1. Make sure GRID RECORD

Plus de documents pour Instruments de musique Elektron Monomachine

Voir le document Elektron Monomachine Manuel d'utilisateur

Elektron Monomachine Manuel d'utilisateur (158 pages)

Elektron Monomachine Manuel d'utilisateur (9 pages)

Commentaires sur ces manuels

Pas de commentaire

Elektron Monomachine Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Instruments de musique Elektron Monomachine. Elektron Monomachine User Manual Manuel d'utilisatio

Résumé du contenu

Plus de documents pour Instruments de musique Elektron Monomachine

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de musique Elektron Monomachine